Custom Coir Blends: Specifying Component Ratios by Volume

VinaTapBuying & Export Guides

Custom coir blend ratios are meaningful only when the measurement basis is clear.

Close-up of coconut coir fibers

Custom coir blend ratios are meaningful only when the measurement basis is clear. A recipe by volume is not a recipe by mass, and dry compressed component volumes cannot be compared casually with loose hydrated volumes. Agree preparation before comparing the finished mixture.

Identify the components precisely

List peat, chips and fiber with their requested grades, treatment and preparation condition. VinaTap’s component ranges are peat 0.1–6 mm, chips 5–20 mm and short fiber 1–5 cm. If another component is requested, confirm its identity and availability before treating it as part of the approved formula.

Close view of short coconut coir fibers
Product reference from the VinaTap library. Confirm the exact grade and package against the approved order.

Define the volume procedure

State whether components are measured before or after hydration and loosening. Agree the vessel, filling and leveling procedure and whether compaction is permitted. Write the recipe as measured input volumes, retaining the preparation instructions alongside the ratio.

Measure the finished yield

Do not assume the final blend occupies the sum of the separate component volumes. Record mixed volume and repeat fills in the real container. Observe settling, wetting and drainage using the same production method before deciding whether the proposed ratio fits the buyer’s needs.

Control formulation changes

Give the approved recipe a version and link it to the accepted sample. Identify which changes require a new sample: component grade, proportion, treatment or nutrient charge may alter the finished product. Agree how changes will be communicated before a repeat order is produced.

Record these points before ordering

  • Component identity and grade fixed
  • Treatment and preparation state recorded
  • Volume-measurement procedure agreed
  • Finished yield and repeat fills measured
  • Container trial used for approval
  • Formula revision linked to the order

Can a mass ratio be substituted for a volume ratio?

Only after a separately verified conversion for the actual component conditions. Moisture and bulk density make an assumed conversion unreliable.

Review VinaTap product specifications and quality-control information. Send the intended use, specification, quantity, packing and destination with your enquiry.

Request Samples & a Bulk Quote

Ask about a product in this article

We have included this page in your enquiry. Add your product specification, quantity and destination port before sending.

More from VinaTap

WhatsApp Factory