VinaTap Manufacturing in Vietnam

Processing plant-based raw materials into products for domestic and international supply.

Coir material on the VinaTap factory processing floor

Coco coir production: four main stages

The processing route depends on the selected product and grade. VinaTap organizes coco coir production around these four main stages.

  1. Grinding and screening

    Raw material preparation and particle separation for the selected coir structure.

  2. Washing and dewatering

    Washing for Low EC products, followed by dewatering. High EC cocopeat is supplied unwashed. Buffering is available when requested.

  3. Drying

    Drying according to the agreed product specification. Moist direct-filled grow bags follow their own moisture specification.

  4. Compression

    Compression into the selected block, brick or compressed grow bag format. Loose and uncompressed formats are packed according to the order.

Washing, optional buffering and biomass-fired rotary drying

VinaTap prepares the processing route around the ordered grade. Low EC cocopeat is washed and checked against the agreed EC method. High EC material is unwashed. Buffering with calcium nitrate and magnesium is available when requested; washing and buffering are specified separately.

Stainless-steel rotary drum dryer

VinaTap reports a stainless-steel rotary drum, 1.6 m in diameter and 22 m long, heated by a biomass furnace. Reported operating readings are 900–1,000°C at the system inlet and 100°C at the outlet. The inlet reading is taken at the drum entrance, where it is in direct contact with incoming wet material; VinaTap reports approximately 80% incoming moisture. These operating-point readings do not establish the temperature reached throughout each cocopeat or chip particle. Agree the moisture reporting basis where it is used as an acceptance criterion.

The confirmed packing-moisture specification for dry cocopeat and coco chips is below 15%. Mechanized drying provides a dedicated drying stage rather than relying solely on sun drying. Moist direct-filled growing bags have a separate agreed moisture condition.

What buyers can verify

Discuss the grade, washing or buffering requirement, moisture test, lot identification and any required microbiological testing before ordering. Historical laboratory results apply to the samples tested; they do not establish that every shipment is sterile or mold-free.

See quality-control information and laboratory evidence, or request the processing and inspection requirements for your order.

Packing, palletizing and container loading

After processing and inspection, products are packed, stacked on pallets where specified, and loaded for shipment. Bag size, pallet arrangement and container loading are confirmed for each order.

Explore cocopeat grades and packing formats, custom grow bags and export documentation.

Inside VinaTap: machinery, packing and container loading

Follow the equipment and handling stages in these photographs from the VinaTap collection. The processing route and packing arrangement depend on the product and order.

Belt filter press and rollers used for dewatering material
01. Dewatering equipment
Rotary drum dryer and connected equipment at VinaTap
02. Rotary drum drying line
Vertical hydraulic compression press inside the VinaTap workshop
03. Vertical compression press
Operator working beside a cocopeat hydraulic compression press
04. Compression at the press
Coir brick wrapping equipment with film rolls in the packing area
05. Brick wrapping equipment
Wrapped stacks of packaged coir products on pallets in the VinaTap warehouse
06. Packaged coir on pallets
Open shipping container during loading of palletized cocopeat products
07. Container loading
Compressed cocopeat products stacked in a shipping container for export
08. Coir products inside the container

Review cocopeat blocks, grow bag formats and export documents, or request processing and packing details.

Product-specific processing

Plant-fiber pallets and biochar use product-specific preparation and inspection requirements. Discuss the selected design or feedstock, measurable acceptance criteria and supporting information before confirming an order.

Review the product, packing and documents together

Before confirming an order, use the following information to define what you need VinaTap to supply and what you want to review.

  1. Product specification: agree the grade, blend, dimensions, moisture and intended application. For EC or pH requirements, state the measurement method alongside the target. See quality-control information and the EC guide.
  2. Packing and loading: specify delivery form, bag or block size, pallet preference, container type and destination port. Use the factory photo collection as examples, and confirm the loading plan for your order.
  3. Shipment documents: review the Phyto, Fumigation and Certificate of Origin examples. Public copies conceal commercial details; each document applies to its stated consignment. Confirm the required document list for your destination before shipment.

For custom growing bags, start with the three-format comparison and grow bag enquiry checklist.

Discuss Your Product and Shipment

Visit our factory

No. 99 Provincial Road 864, Kim Son Commune, Dong Thap Province, Vietnam. Contact VinaTap to arrange the visit and confirm the relevant product or process you wish to review.

Coordinates: 10°20’03.7″N 106°16’55.9″E

Agree the checks before shipment

Confirm processing grade, sampling, product specification, packing and container plan. Review quality control, cocopeat specifications and export documents.

Let’s discuss your specification.

Request a Quote
WhatsApp Factory