A cocopeat bag volume check needs the same material preparation and filling procedure on both sides of the transaction.
A cocopeat bag volume check needs the same material preparation and filling procedure on both sides of the transaction. The printed 50 L or 100 L description is a declaration to be interpreted with its measurement basis, not a fixed kilogram conversion.
Agree the declared state
Ask whether liters refer to loose material as supplied, prepared material or another agreed state. Record moisture condition, any hydration and the method of loosening. A receiving team should not compare a tightly compressed fill with a supplier’s loosely filled measurement without resolving the difference.
Product reference from the VinaTap library. Confirm the exact grade and package against the approved order.
Use a defined measuring vessel
Choose a suitable known-volume vessel and agree how it is filled and leveled. State whether tapping or compression is allowed and how oversized pieces are handled. Record the procedure on the inspection sheet so a repeat check does not silently change the test.
Repeat across representative bags
Identify the lot and select samples according to the agreed plan. Keep the individual results rather than reporting only a convenient average. If one bag is damaged or unusually wet, record and investigate it separately before drawing conclusions about normal production.
Keep mass and moisture as separate results
Measure net mass with appropriate equipment and report the moisture method and basis. VinaTap supplies 50 L and 100 L bag options, but no fixed kilogram equivalent is assumed here. Any accepted variation should be agreed with the order rather than invented during a dispute.
Record these points before ordering
Declared volume state recorded
Hydration and loosening procedure fixed
Vessel and leveling method agreed
Representative bag references retained
Individual volume and mass results kept
Recheck and tolerance arrangements documented
Can I judge volume only from the outside bag dimensions?
No. The package shape, headspace and material condition do not establish the measured loose or prepared substrate volume.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.